Basic path, finds the shortest path from A to B. More...

Detailed Description

Basic path, finds the shortest path from A to B.

This is the most basic path object it will try to find the shortest path from A to B.
Many other path types inherit from this type.

See Also: Seeker.StartPath

Public Member Functions
override void	CalculateStep (long targetTick)
	Calculates the path until completed or until the time has passed targetTick.

override void	Cleanup ()
	Always called after the path has been calculated.

override string	DebugString (PathLog logMode)
	Returns a debug string for this path.

override uint	GetConnectionSpecialCost (GraphNode a, GraphNode b, uint currentCost)
	May be called by graph nodes to get a special cost for some connections.

Vector3	GetMovementVector (Vector3 point)
	Returns in which direction to move from a point on the path.

override void	Initialize ()
	Initializes the path.

override void	Prepare ()
	Prepares the path.

override void	Reset ()
	Reset all values to their default values.

void	ResetCosts (Path p)
	Resets End Node Costs.

Public Member Functions inherited from Path
void	AdvanceState (PathState s)
	Threadsafe increment of the state.

uint	CalculateHScore (GraphNode node)
	Estimated cost from the specified node to the target.

bool	CanTraverse (GraphNode node)
	Returns if the node can be traversed.

void	Claim (System.Object o)
	Claim this path (pooling).

void	Error ()
	Aborts the path because of an error.

void	ForceLogError (string msg)
	Logs an error and calls Error().

Int3	GetHTarget ()

PathState	GetState ()
	Returns the state of the path in the pathfinding pipeline.

uint	GetTagPenalty (int tag)
	Returns penalty for the given tag.

float	GetTotalLength ()
	Total Length of the path.

uint	GetTraversalCost (GraphNode node)

bool	IsDone ()
	Returns if this path is done calculating.

void	Log (string msg)
	Appends a message to the errorLog.

void	LogError (string msg)
	Appends msg to errorLog and logs msg to the console.

virtual void	OnEnterPool ()
	Called when the path enters the pool.

void	Release (System.Object o, bool silent=false)
	Releases a path claim (pooling).

void	ReleaseSilent (System.Object o)
	Releases the path silently (pooling).

virtual void	ReturnPath ()
	Calls callback to return the calculated path.

IEnumerator	WaitForPath ()
	Waits until this path has been calculated and returned.

Public Attributes
bool	calculatePartial
	Calculate partial path if the target node cannot be reached.

GraphNode	endHint
	Hints can be set to enable faster Get Nearest Node queries.

GraphNode	endNode
	End node of the path.

Vector3	endPoint
	End point of the path.

Vector3	originalEndPoint
	End Point exactly as in the path request.

Vector3	originalStartPoint
	Start Point exactly as in the path request.

bool	recalcStartEndCosts = true
	Defines if start and end nodes will have their connection costs recalculated for this path.

GraphNode	startHint
	Hints can be set to enable faster Get Nearest Node queries.

Int3	startIntPoint
	Start point in integer coordinates.

GraphNode	startNode
	Start node of the path.

Vector3	startPoint
	Start point of the path.

Public Attributes inherited from Path
OnPathDelegate	callback
	Callback to call when the path is complete.

float	duration
	The duration of this path in ms.

int	enabledTags = -1
	Which graph tags are traversable.

Heuristic	heuristic
	Determines which heuristic to use.

float	heuristicScale = 1F
	Scale of the heuristic values.

OnPathDelegate	immediateCallback
	Immediate callback to call when the path is complete.

NNConstraint	nnConstraint = PathNNConstraint.Default
	Constraint for how to search for nodes.

List< GraphNode >	path
	Holds the path as a Node array.

int	searchedNodes
	Number of nodes this path has searched.

int	searchIterations
	The number of frames/iterations this path has executed.

List< Vector3 >	vectorPath
	Holds the (perhaps post processed) path as a Vector3 list.

Protected Member Functions
virtual void	CompletePathIfStartIsValidTarget ()
	Checks if the start node is the target and complete the path if that is the case.

void	UpdateStartEnd (Vector3 start, Vector3 end)
	Sets the start and end points.

Protected Member Functions inherited from Path
void	DebugStringPrefix (PathLog logMode, System.Text.StringBuilder text)
	Writes text shared for all overrides of DebugString to the string builder.

void	DebugStringSuffix (PathLog logMode, System.Text.StringBuilder text)
	Writes text shared for all overrides of DebugString to the string builder.

bool	HasExceededTime (int searchedNodes, long targetTime)

virtual void	Trace (PathNode from)
	Traces the calculated path from the end node to the start.

Protected Attributes
int[]	endNodeCosts
	Saved original costs for the end node.

PathNode	partialBestTarget
	Current best target for the partial path.

Protected Attributes inherited from Path
PathNode	currentR
	The node currently being processed.

bool	hasBeenReset
	True if the Reset function has been called.

Int3	hTarget
	Target to use for H score calculations.

GraphNode	hTargetNode
	Target to use for H score calculation.

int[]	internalTagPenalties
	The tag penalties that are actually used.

int[]	manualTagPenalties
	Tag penalties set by other scripts.

float	maxFrameTime
	The max number of milliseconds per iteration (frame, in case of non-multithreading)

Properties
virtual bool	hasEndPoint `[get]`
	Determines if a search for an end node should be done.

Properties inherited from Path
System.DateTime	callTime `[get, set]`
	When the call was made to start the pathfinding for this path.

PathCompleteState	CompleteState `[get, set]`
	Current state of the path.

bool	error `[get]`
	If the path failed, this is true.

string	errorLog `[get]`
	Log messages with info about eventual errors.

virtual bool	FloodingPath `[get]`
	True for paths that want to search all nodes and not jump over nodes as optimizations.

PathHandler	pathHandler `[get, set]`
	Data for the thread calculating this path.

ushort	pathID `[get, set]`
	ID of this path.

bool	recycled `[get, set]`
	True if the path is currently recycled (i.e in the path pool).

int[]	tagPenalties `[get, set]`
	Penalties for each tag.

Constructors
	ABPath ()
	Default constructor.

static ABPath	Construct (Vector3 start, Vector3 end, OnPathDelegate callback=null)
	Construct a path with a start and end point.

void	Setup (Vector3 start, Vector3 end, OnPathDelegate callbackDelegate)

Additional Inherited Members
Package Functions inherited from Path
void	PrepareBase (PathHandler pathHandler)
	Prepares low level path variables for calculation.

Package Attributes inherited from Path
Path	next
	Internal linked list implementation.

bool	pooled
	True if the path is currently pooled.

Constructor & Destructor Documentation

ABPath ( )

Default constructor.

Do not use this. Instead use the static Construct method which can handle path pooling.

Member Function Documentation

override void CalculateStep ( long targetTick )

virtual

Calculates the path until completed or until the time has passed targetTick.

Usually a check is only done every 500 nodes if the time has passed targetTick. Time/Ticks are got from System.DateTime.UtcNow.Ticks.

Basic outline of what the function does for the standard path (Pathfinding.ABPath).

while the end has not been found and no error has ocurred
check if we have reached the end
if so, exit and return the path
open the current node, i.e loop through its neighbours, mark them as visited and put them on a heap
check if there are still nodes left to process (or have we searched the whole graph)
if there are none, flag error and exit
pop the next node of the heap and set it as current
check if the function has exceeded the time limit
if so, return and wait for the function to get called again

Implements Path.

Reimplemented in MultiTargetPath, RandomPath, FloodPathTracer, and XPath.

override void Cleanup ( )

virtual

Always called after the path has been calculated.

Guaranteed to be called before other paths have been calculated on the same thread. Use for cleaning up things like node tagging and similar.

Reimplemented from Path.

Reimplemented in MultiTargetPath.

virtual void CompletePathIfStartIsValidTarget ( )

protectedvirtual

Checks if the start node is the target and complete the path if that is the case.

This is necessary so that subclasses (e.g XPath) can override this behaviour.

If the start node is a valid target point, this method should set CompleteState to Complete and trace the path.

Reimplemented in XPath.

static ABPath Construct	(	Vector3	start,
		Vector3	end,
		OnPathDelegate	callback = `null`
	)

static

Construct a path with a start and end point.

The delegate will be called when the path has been calculated. Do not confuse it with the Seeker callback as they are sent at different times. If you are using a Seeker to start the path you can set callback to null.

Returns: The constructed path object

override string DebugString ( PathLog logMode )

virtual

Returns a debug string for this path.

Reimplemented from Path.

Reimplemented in MultiTargetPath.

override uint GetConnectionSpecialCost	(	GraphNode	a,
		GraphNode	b,
		uint	currentCost
	)

virtual

May be called by graph nodes to get a special cost for some connections.

Nodes may call it when PathNode.flag2 is set to true, for example mesh nodes, which have a very large area can be marked on the start and end nodes, this method will be called to get the actual cost for moving from the start position to its neighbours instead of as would otherwise be the case, from the start node's position to its neighbours. The position of a node and the actual start point on the node can vary quite a lot.

The default behaviour of this method is to return the previous cost of the connection, essentiall making no change at all.

This method should return the same regardless of the order of a and b. That is f(a,b) == f(b,a) should hold.

Parameters

a	Moving from this node
b	Moving to this node
currentCost	The cost of moving between the nodes. Return this value if there is no meaningful special cost to return.

Reimplemented from Path.

Vector3 GetMovementVector ( Vector3 point )

Returns in which direction to move from a point on the path.

A simple and quite slow (well, compared to more optimized algorithms) algorithm first finds the closest path segment (from vectorPath) and then returns the direction to the next point from there. The direction is not normalized.

Returns: Direction to move from a point, returns Vector3.zero if vectorPath is null or has a length of 0

override void Initialize ( )

virtual

Initializes the path.

Sets up the open list and adds the first node to it

Implements Path.

Reimplemented in MultiTargetPath, RandomPath, and FloodPathTracer.

override void Prepare ( )

virtual

Prepares the path.

Searches for start and end nodes and does some simple checking if a path is at all possible

Implements Path.

Reimplemented in MultiTargetPath, and RandomPath.

override void Reset ( )

virtual

Reset all values to their default values.

All inheriting path types must implement this function, resetting ALL their variables to enable recycling of paths. Call this base function in inheriting types with base.Reset ();

Reimplemented from Path.

Reimplemented in MultiTargetPath, RandomPath, FloodPathTracer, and XPath.

void ResetCosts ( Path p )

Resets End Node Costs.

Costs are updated on the end node at the start of the search to better reflect the end point passed to the path, the previous ones are saved in endNodeCosts and are reset in this function which is called after the path search is complete

void Setup	(	Vector3	start,
		Vector3	end,
		OnPathDelegate	callbackDelegate
	)

protected

void UpdateStartEnd	(	Vector3	start,
		Vector3	end
	)

protected

Sets the start and end points.

Sets originalStartPoint, originalEndPoint, startPoint, endPoint, startIntPoint and hTarget (to end )

Member Data Documentation

bool calculatePartial

Calculate partial path if the target node cannot be reached.

If the target node cannot be reached, the node which was closest (given by heuristic) will be chosen as target node and a partial path will be returned. This only works if a heuristic is used (which is the default). If a partial path is found, CompleteState is set to Partial.

Note: It is not required by other path types to respect this setting

Warning: This feature is currently a work in progress and may not work in the current version

GraphNode endHint

Hints can be set to enable faster Get Nearest Node queries.

Only applies to some graph types

GraphNode endNode

End node of the path.

int [] endNodeCosts

protected

Saved original costs for the end node.

See Also: ResetCosts

Vector3 endPoint

End point of the path.

This is the closest point on the endNode to originalEndPoint

Vector3 originalEndPoint

End Point exactly as in the path request.

Vector3 originalStartPoint

Start Point exactly as in the path request.

PathNode partialBestTarget

protected

Current best target for the partial path.

This is the node with the lowest H score.

Warning: This feature is currently a work in progress and may not work in the current version

bool recalcStartEndCosts = true

Defines if start and end nodes will have their connection costs recalculated for this path.

These connection costs will be more accurate and based on the exact start point and target point, however it should not be used when connection costs are not the default ones (all build in graph generators currently generate default connection costs).

See Also: Int3.costMagnitude

Since: Added in 3.0.8.3

Bug:: Does not do anything in 3.2 and up due to incompabilities with multithreading. Will be enabled again in later versions.

GraphNode startHint

Hints can be set to enable faster Get Nearest Node queries.

Only applies to some graph types

Int3 startIntPoint

Start point in integer coordinates.

GraphNode startNode

Start node of the path.

Vector3 startPoint

Start point of the path.

This is the closest point on the startNode to originalStartPoint

Property Documentation

virtual bool hasEndPoint

getprotected

Determines if a search for an end node should be done.

Set by different path types.

Since: Added in 3.0.8.3

The documentation for this class was generated from the following file:

/Users/arong/Unity/a-pathfinding-project/Assets/AstarPathfindingProject/Pathfinders/ABPath.cs

Detailed Description

Public Member Functions

Public Attributes

Protected Member Functions

Protected Attributes

Properties

Constructors

Additional Inherited Members

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation

Property Documentation