Linearly interpolating movement script. More...

Detailed Description

Linearly interpolating movement script.

This movement script will follow the path exactly, it uses linear interpolation to move between the waypoints in the path. This is desirable for some types of games. It also works in 2D.

Recommended setup:

This depends on what type of movement you are aiming for. If you are aiming for movement where the unit follows the path exactly (you are likely using a grid or point graph) the default settings on this component should work quite well, however I recommend that you adjust the StartEndModifier on the Seeker component: set the 'Exact Start Point' field to 'NodeConnection' and the 'Exact End Point' field to 'SnapToNode'.

If you on the other hand want smoother movement I recommend adding the Simple Smooth Modifier to the GameObject as well. You may also want to tweak the rotationSpeed.

Public Member Functions
virtual void	ForceSearchPath ()
	Requests a path to the target.

virtual Vector3	GetFeetPosition ()

void	OnDisable ()

virtual void	OnPathComplete (Path _p)
	Called when a requested path has finished calculation.

virtual void	OnTargetReached ()
	The end of the path has been reached.

virtual void	SearchPath ()
	Requests a path to the target.

float	TrySearchPath ()
	Tries to search for a path.

Public Attributes
bool	canMove = true
	Enables or disables movement.

bool	canSearch = true
	Enables or disables searching for paths.

bool	enableRotation = true
	If true, the AI will rotate to face the movement direction.

bool	interpolatePathSwitches = true
	If true, some interpolation will be done when a new path has been calculated.

float	repathRate = 0.5F
	Determines how often it will search for new paths.

bool	rotationIn2D = false
	If true, rotation will only be done along the Z axis.

float	rotationSpeed = 10
	How quickly to rotate.

float	speed = 3
	Speed in world units.

float	switchPathInterpolationSpeed = 5
	How quickly to interpolate to the new path.

Transform	target
	Target to move towards.

Protected Member Functions
override void	Awake ()
	Initializes reference variables.

virtual Vector3	CalculateNextPosition (out Vector3 direction)
	Calculate the AI's next position (one frame in the future).

virtual void	ConfigureNewPath ()
	Finds the closest point on the current path and configures the interpolator.

virtual void	ConfigurePathSwitchInterpolation ()

virtual void	OnEnable ()
	Called when the component is enabled.

IEnumerator	RepeatTrySearchPath ()
	Tries to search for a path every repathRate seconds.

virtual void	Start ()
	Starts searching for paths.

virtual void	Update ()

Protected Member Functions inherited from VersionedMonoBehaviour
virtual int	OnUpgradeSerializedData (int version)
	Handle serialization backwards compatibility.

Protected Attributes
bool	canSearchAgain = true
	Only when the previous path has been returned should be search for a new path.

PathInterpolator	interpolator = new PathInterpolator()

float	lastRepath = -9999
	Time when the last path request was sent.

ABPath	path
	Current path which is followed.

Vector3	previousMovementDirection

Vector3	previousMovementOrigin
	When a new path was returned, the AI was moving along this ray.

float	previousMovementStartTime = -9999

Seeker	seeker
	Cached Seeker component.

Transform	tr
	Cached Transform component.

Properties
bool	targetReached `[get, set]`
	True if the end-of-path is reached.

Private Member Functions
void	Init ()

Private Attributes
bool	startHasRun = false
	Holds if the Start function has been run.

Member Function Documentation

override void Awake ( )

protectedvirtual

Initializes reference variables.

If you override this function you should in most cases call base.Awake () at the start of it.

Reimplemented from VersionedMonoBehaviour.

virtual Vector3 CalculateNextPosition ( out Vector3 direction )

protectedvirtual

Calculate the AI's next position (one frame in the future).

Parameters

direction The tangent of the segment the AI is currently traversing. Not normalized.

virtual void ConfigureNewPath ( )

protectedvirtual

Finds the closest point on the current path and configures the interpolator.

virtual void ConfigurePathSwitchInterpolation ( )

protectedvirtual

virtual void ForceSearchPath ( )

virtual

Requests a path to the target.

Bypasses 'is-it-a-good-time-to-request-a-path' checks.

virtual Vector3 GetFeetPosition ( )

virtual

void Init ( )

private

void OnDisable ( )

virtual void OnEnable ( )

protectedvirtual

Called when the component is enabled.

virtual void OnPathComplete ( Path _p )

virtual

Called when a requested path has finished calculation.

A path is first requested by SearchPath, it is then calculated, probably in the same or the next frame. Finally it is returned to the seeker which forwards it to this function.

virtual void OnTargetReached ( )

virtual

The end of the path has been reached.

If you want custom logic for when the AI has reached it's destination add it here. You can also create a new script which inherits from this one and override the function in that script.

IEnumerator RepeatTrySearchPath ( )

protected

Tries to search for a path every repathRate seconds.

See Also: TrySearchPath

virtual void SearchPath ( )

virtual

Requests a path to the target.

Some inheriting classes will prevent the path from being requested immediately when this function is called, for example when the AI is currently traversing a special path segment in which case it is usually a bad idea to search for a new path.

virtual void Start ( )

protectedvirtual

Starts searching for paths.

If you override this function you should in most cases call base.Start () at the start of it.

See Also: Init; RepeatTrySearchPath

float TrySearchPath ( )

Tries to search for a path.

Will search for a new path if there was a sufficient time since the last repath and both canSearchAgain and canSearch are true and there is a target.

Returns: The time to wait until calling this function again (based on repathRate)

virtual void Update ( )

protectedvirtual

Member Data Documentation

bool canMove = true

Enables or disables movement.

See Also: canSearch

bool canSearch = true

Enables or disables searching for paths.

Setting this to false does not stop any active path requests from being calculated or stop it from continuing to follow the current path.

See Also: canMove

bool canSearchAgain = true

protected

Only when the previous path has been returned should be search for a new path.

bool enableRotation = true

If true, the AI will rotate to face the movement direction.

bool interpolatePathSwitches = true

If true, some interpolation will be done when a new path has been calculated.

This is used to avoid short distance teleportation.

PathInterpolator interpolator = new PathInterpolator()

protected

float lastRepath = -9999

protected

Time when the last path request was sent.

ABPath path

protected

Current path which is followed.

Vector3 previousMovementDirection

protected

Vector3 previousMovementOrigin

protected

When a new path was returned, the AI was moving along this ray.

Used to smoothly interpolate between the previous movement and the movement along the new path. The speed is equal to movement direction.

float previousMovementStartTime = -9999

protected

float repathRate = 0.5F

Determines how often it will search for new paths.

If you have fast moving targets or AIs, you might want to set it to a lower value. The value is in seconds between path requests.

bool rotationIn2D = false

If true, rotation will only be done along the Z axis.

float rotationSpeed = 10

How quickly to rotate.

Seeker seeker

protected

Cached Seeker component.

float speed = 3

Speed in world units.

bool startHasRun = false

private

Holds if the Start function has been run.

Used to test if coroutines should be started in OnEnable to prevent calculating paths in the awake stage (or rather before start on frame 0).

float switchPathInterpolationSpeed = 5

How quickly to interpolate to the new path.

Transform target

Target to move towards.

The AI will try to follow/move towards this target. It can be a point on the ground where the player has clicked in an RTS for example, or it can be the player object in a zombie game.

Transform tr

protected

Cached Transform component.

Property Documentation

bool targetReached

getset

True if the end-of-path is reached.

See Also: TargetReached

The documentation for this class was generated from the following file:

/Users/arong/Unity/a-pathfinding-project/Assets/AstarPathfindingProject/Core/AI/AILerp.cs

Detailed Description

Public Member Functions

Public Attributes

Protected Member Functions

Protected Attributes

Properties

Private Member Functions

Private Attributes

Member Function Documentation

Member Data Documentation

Property Documentation